Frequently Asked Questions
OTECH Natural Gas Meter Covers.
Place the meter cover over the meter, insure that the meter cover window is in line with the meter face plate, drill (4) holes in the meter flange to suit the mounting of the meter cover around the meter, and onto the building wall. (Mounting Screws not included)
NO! IF YOU SMELL GAS AROUND YOUR METER, STEP 20 FEET AWAY AND CALL YOUR NATURAL GAS UTILITY COMPANY IMMEDIATELY AND REPORT THE GAS LEAK.
You can call your gas utility company, a heating and cooling contractor, or plumber to install your meter cover. Expect an installation fee from contractors to install your cover.
Yes, with paints that are designed to cover plastic. Please follow the paint's instructions as you may need warmer temperatures or even a light sanding to let the paint adhere to the plastic.
Call your gas utility company and report that your meter is too low and needs to be raised. The utilities normally do not charge for raising the gas meter. Regulations require the meter to be installed 2' above grade, with the shutoff valve accessible.
Nemo Power Tools
The manufacture recommends that the operator pressurizes the tool to at least 15lbs for above ground and shallow underwater operations.
Nemo cordless tools have a special seal that allows the battery to be connected underwater or above water without causing a spark.
Nemo tool are designed to resist most corrosive chemicals.
No, in most cases Nemo cordless power tools weigh less than traditional cordless power tools of the same size and kind.